IDEC High Performance Series - Manual (Page 190)

1 Creating and Manipulating WindO/I-NV2 Project Data
4-4 WindO/I-NV2 User’s Manual
●
Creating new project data using a template
You can create project data using the templates provided with in WindO/I-NV2.
1 Click , then click to the right of New, and then click From Templates.
The New Project from Template dialog box is displayed.
2 Enter the project name and then click Next.
The Select Project Template dialog box is displayed.
3 Select a template under Project Template and then click Next.
The Open Screens dialog box is displayed.
This concludes creating project data.
Next you will open a screen. For details, refer to Chapter 5 “2.2 Opening Screens” on page 5-3.
• You cannot use the following characters in the project name.
. \ / : * ? “ < > |
• You cannot create project data in read-only folders or in WindO/I-NV2’s working folders (temporary
folders that start with “~”).
• If you click Manual, the Project Template manual opens.
• You can return to the New Project from Template dialog box and change its setting by clicking
Previous.