IDEC High Performance Series - Manual (Page 1149)

WindO/I-NV2 User's Manual 25-23
2 Monitoring on the MICRO/I
25
Monitor F
unction
3 Enter the value of device and press ENT.
• Press Dec or Hex to change the display type for the value to enter.
• Press CLR to delete the entered value of device.
• Press CAN to stop entering the value of device.
The value of device is changed.
Write Data
0 CLR CAN
ENT
1 2 3
4 5 6 F
7 8 9 E
A B C D Dec Hex
Current
（word）
0
/ 0H
LDR 1 2
1
2
• If a value of device is invalid, pressing ENT will not return you to Device Monitor.
• If the display type is decimal, A to F cannot be used.
LM
LDR
Data Del Select
0
00001
1
2
Device Monitor
Up Down
Dec/Hex Device