IDEC High Performance Series - Manual (Page 393)

WindO/I-NV2 User’s Manual 8-69
5 Key Button
8
Bu
tton
s
5.3 Properties of Key Button Dialog Box
This section describes items and buttons on the properties dialog box.
●
General Tab
■ Part Name
Enter a name for the part. The maximum number is 20 characters.
■ >>OFF Text, >>ON Text
Applies the text entered in the Part Name field to the Text field under the OFF or ON fields on the Registration
Text tab. This is used as the Registration Text when the button is OFF or ON.
■ Key Type
Select the function for the Key Button.
The settings explained below appear depending on the type of key selected.
■ Popup Screen No.
The Alt key switches the current Popup Screen used as a Keypad when this button is pressed.
Specify the Popup Screen number to open a Keypad for.
This setting is enabled only if Alt was selected using the Key Browser.
Displays settings
applicable to the
selected key.
(Key)
To specify the Registration Text to use when the button is ON, select the Set by State check box on the
Registration Text tab. If left unchecked, the same Registration Text assigned for the OFF state is
displayed for the ON state as well.
Language: Switches the display of the key that is displayed when Keypad is selected in Key Browser. These
languages are available:
Japanese, European, Central European, Baltic, Cyrillic.
Browse: Opens the Key Browser when clicked. Select a key.
For details, refer to “5.5 Key Browser” on page 8-88.
(Key): Displays the name of the key selected using the Key Browser.
• When you select a key, the label for that key is assigned as the Registration Text.
• The function of Key Button will affect on the next scan when the trigger condition is satisfied.