IDEC High Performance Series - Manual (Page 720)

3 Pie Chart
11-48 WindO/I-NV2 User’s Manual
■ Data Type
Selects the data type handled by the chart from the following.
"BIN16(+)", "BIN32(+)", "BCD4", "BCD8", "float32 *1 "
For details, refer to Chapter 2 “1.2 Available Data” on page 2-2.
■ Settings
Lists the chart settings. The list shows the numbers, source devices, and colors for the chart.
■ Reference Device
Specifies the source word device for the data to display in the chart.
Click
to display the Device Address Settings dialog box. For the device address configuration procedure, refer
to Chapter 2 “5.1 Device Address Settings” on page 2-67.
*1 HG2G-5F, HG3G/4G only
Pie: Shows the proportion of the sum of the data as a pie chart.
Example: When displaying the values for three devices
Ch3 data 0
Ch2 data 0
50
100
30
60
10
50
Ch1 data 0 100 120 300
ProporƟon 1 : 1 : 1 2 : 2 : 1 4 : 2 : 1 30 : 5 : 1
Pie chart display
When the BCD4, BCD8, or float32 is selected as Data Type and the value cannot be expressed with the
data type selected for the data that was read, 1 is written to System Area 2 Arithmetic Error bit (address+2,
bit 5), and an error message is displayed. For details, refer to Chapter 4 “Arithmetic error” on page 4-34.
No.: Shows the numbers for the chart (Ch1 to Ch10).
For Horizontal Bar, the numbers are listed in order from the left. For Vertical Bar, the numbers are
listed in order from the top.
For Pie, the numbers are listed clockwise.
Device: Shows the source device.
Fg. Color: Shows the foreground color of the chart.
Bg. Color: Shows the background color of the chart.
Pattern: Shows the chart pattern.
Horizontal bar VerƟcal bar
Ch1
Ch1 Ch2 Ch3
Ch2
Ch3
Pie chart
Ch1
Ch2
Ch3