IDEC High Performance Series - Manual (Page 708)

2 Line Chart
11-36 WindO/I-NV2 User’s Manual
●
Label Tab
The Label tab is only displayed in Advanced mode.
■ Show Label for X-Axis, Show Label for Y-Axis
Select this check box to display a label on X axis and Y axis scales.
■ Use Text Manager
Select this check box if using the text registered in Text Manager for labels.
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
Font: Selects the font for text used in labels from the following.
Japanese, European, Chinese, Taiwanese, Korean, Central European, Baltic, Cyrillic
Can only be set when the Use Text Manager check box is cleared.
The characters that can be displayed depend on the font. For details, refer to Chapter 2 “1.3
Available Text” on page 2-6.
Text ID: Specifies the Text Manager ID No. (1 to 32000) when text registered in the Text Manager are used
for labels.
Click to display Text Manager.
Can only be set when the Use Text Manager check box is selected.
Text: Inputs characters to be displayed for labels. Maximum number is 40 characters.
The characters that can be entered depend on the font selected using Font. For details, refer to
Chapter 2 “1.3 Available Text” on page 2-6.
Can only be input when the Use Text Manager check box is cleared.
When entering Unicode characters click to display the Unicode Input dialog box. Enter the characters
using the Unicode Input dialog box then click OK.
Color: Selects the color of the text used for labels (color: 256 colors, monochrome: 16 shades).
Click Color to open the Color Palette. Select a color from the Color Palette.
If the area for displaying the label is too small, the label will not be displayed properly.
If a carriage return (CR) is included, the characters after the CR are not displayed. However, if Windows
Font is set for the specified Text ID, all the characters are displayed.