IDEC High Performance Series - Manual (Page 1120)

4 Clear
24-28 WindO/I-NV2 User’s Manual
4.2 Deleting Data from an External Memory Inserted in the MICRO/I
1 Change communication settings according to the connection method between the computer and the MICRO/I.
In the Communication Settings dialog box, select MICRO/I from Communicate with. To communicate with the
MICRO/I as an O/I Link Slave via an O/I Link Master, select O/I Link Slave. For details, refer to “1.3 Change
Communication Settings” on page 24-6.
2 Open project data.
3 On the Online tab, in the Touch Screen group, click Clear, then click Stored Data in Memory Card.
The Clear Data dialog box is displayed.
4 Select the check box for the data items to be deleted from the Memory Card Folder.
Screenshot Data, Alarm Log Data, Data Log Data, Operation Log Data *1 , and Recipe Files
5 Click OK.
• When Communicate with is set to MICRO/I and Port to USB or Serial, deletion of the data starts.
• When Communicate with is set to MICRO/I and Port is set to Ethernet, the Target IP Address dialog box is
displayed. Specify the IP address of the MICRO/I, and then click OK to start deletion of the data. For details, refer
to “To execute any function except project data download” on page 24-9.
• When Communicate with is set to O/I Link Slave, the Target Slave dialog box is displayed. Specify the slave
station of the MICRO/I to communicate with, and then click OK to start deletion of the data.
If Port is set to Ethernet, specify the IP address of the master to be used. If Port is Ethernet and the via Web
Server Unit check box is selected, specify the port number of the Web Server Unit connected to the destination
MICRO/I. For details, refer to “To execute any function except project data download” on page 24-11.
*1 HG2G-5F, HG3G/4G only
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
If security is enabled in the MICRO/I project, the Password Screen is displayed. Enter the password.
For details, refer to Chapter 23 “User Accounts and the Security Function” on page 23-1.