2 target information dialog box, Target information dialog box -33, Online f unction – IDEC High Performance Series User Manual
Page 1125
WindO/I-NV2 User’s Manual
24-33
6 System Information
24
Online F
unction
6.2 Target Information Dialog Box
This section describes the settings and buttons of the Target Information dialog box.
■
Target Runtime Information
■
Target Project Information
■
Opened Project Information
O/I Type:
Shows the type number of MICRO/I
Runtime Version:
Shows the runtime system version of the MICRO/I.
Memory Space (byte): Shows the maximum amount of project data (bytes) that can be downloaded to the
MICRO/I.
Target Font Information:
Checks the additional fonts currently installed on the MICRO/I. Click this button to
display the Target Font Information dialog box. For details, refer to “Target Font
Information Dialog Box” on page 24-34.
Target Memory Card Information: Checks the state of an external memory inserted in the MICRO/I, its total capacity,
available capacity, and used capacity. Click this button to display the Target
Memory Card Information dialog box. For details, refer to “Target Memory Card
Dialog Box” on page 24-34.
Project Name:
Shows the project name of projects downloaded to the MICRO/I.
Modified Date:
Displays the time that project data downloaded to the MICRO/I was last saved in
WindO/I-NV2.
Project Version:
Displays the version of WindO/I-NV2 used to create the project data downloaded to the
MICRO/I.
PLC Manufacturer:
Displays the external device manufacturer configured in the project downloaded to the
MICRO/I.
Protocol:
Displays the host I/F driver configured in the project downloaded to the MICRO/I.
Driver Version:
Displays the version of the host I/F driver in the connected MICRO/I.
Project Name:
Shows the project name of the project being edited.
Modified Date:
Displays the time that the project being edited was last saved in WindO/I-NV2.
Version Number:
Displays the version of WindO/I-NV2 used to create the project being edited.
This function can be used to show information about a project that is being edited and simultaneously check
information about project data downloaded to the MICRO/I.