IDEC High Performance Series - Manual (Page 850)

2 Data Log Function Configuration Procedure
14-12 WindO/I-NV2 User’s Manual
■ For the HG1F/2F/3F/4F
Select the Log to Data Storage Area check box and click
for either Number of Stored Data for Alarm Log,
Number of HG Keep Register (LKR), or Number of HG Keep Relay (LK) to display the Data Storage Area
Management dialog box.
Decrease the numbers for Number of Stored Data for Alarm Log, Number of HG Keep Register (LKR), and
Number of HG Keep Relay (LK). Click OK to close the Data Storage Area Management dialog box.
The number for Number of Stored Data for Data Log per Device is set.
The free space created by adjusting the numbers for Number of Stored Data for Alarm Log, Number of HG
Keep Register (LKR), and Number of HG Keep Relay (LK) is automatically allocated to the data storage amount
for the Data Log.
19 Click OK.
The Data Log Settings dialog box closes.
This concludes configuring the sampling conditions and devices for sampling data.
Next, configure the functions to execute using sampled data.

“4.1 Display the Data in the Line Chart” on page 14-31
 “4.2 Displaying Data as Numerical Values” on page 14-33
 “4.3 Saving the Data as a CSV File” on page 14-43