IDEC High Performance Series - Manual (Page 845)

WindO/I-NV2 User’s Manual 14-7
1 Overview
14
Data Log Function
1.5 Using the Data
The saved data can be used in the following ways.
*1 HG2G-S/-5S/-5F, HG3G/4G only
*2 HG3F/4F only
• Display the data in the Line Chart
Configure the data channel
numbers and data numbers and
display the data in the Line Chart.
For details, refer to “4.1 Display
the Data in the Line Chart” on
page 14-31.
• Save to and read from a memory card
Output data from the MICRO/I to the memory
card as a CSV file and use it on a PC.
For details, refer to “4.3 Saving the Data as a
CSV File” on page 14-43.
• Upload the data with the
WindO/I-NV2 utility Downloader
Use data uploaded as a CSV file on a
PC.
For details, refer to the Downloader
manual.
• Display the data with the
Numerical Input or the Numerical
Display
*1
Copy the data to an internal device
and display it with the Numerical
Input or the Numerical Display.
For details, refer to “4.2 Displaying
Data as Numerical Values” on page
14-33.
• Access the data with the web server function *2
You can access the data in internal memory or on the memory card
inserted in the MICRO/I.
For details, refer to Chapter 27 “2.7 Data Display” on page 27-20.
Sampling Time Data001 Data002 Data003
01/01/2011 12:00:00 20 120 201
01/01/2011 12:10:00 21 121 204
01/01/2011 12:20:00 22 122 206
01/01/2011 12:30:00 23 123 206
01/01/2011 12:40:00 24 124 210
Data Log data
To use with the MICRO/I To use with devices other than the MICRO/I
Book1
Data Log data
(CSV)
Sampling Time Data001 Data002 Data003 Data004
24
124
210
Data001
Data002
Data003
Web Browser Terminal
(Computer, PDA, etc.)
Local Network
Ethernet CommunicaƟon (TCP/IP)