IDEC High Performance Series - Manual (Page 701)

WindO/I-NV2 User’s Manual 11-29
2 Line Chart
11
Charts
●
Pen (Log) Tab
The Pen (Log) tab is only displayed when Log Trend (Normal) or Log Trend (Pen Recorder) is selected for
Chart Type on the General tab.
■ Settings
Lists the chart settings.
■ Channel No.
Specifies the Data Log channel number to display on the chart (1 to 128).
■ Data No. *1
Specifies the data number to display on the chart out of the data contained in the selected Data Log channel number.
*1 HG2G-S/-5S/-5F, HG3G/4G only
No.: Shows the numbers for the chart (Ch1 to Ch20).
Channel No.: Shows the Data Log channel number to display on the chart.
Data No.: Out of the data contained in the selected Data Log channel number, shows the data
number to display on the chart.
Line Type: Shows the chart line type.
Line Size: Shows the chart line size.
Line Color: Shows the chart line color.
Data Log Settings: Displays the Data Log Settings dialog box where you can configure the channel while
checking the data to display. Select Channel No. under Settings, and then click OK to
close the Data Log Settings dialog box. Channel No. reflects the selected channel
number.
If the sampling condition for the channels and the amount of log data saved in the data storage area differ,
the chart cannot be displayed. Set the sampling conditions or channel numbers to the same data.
For the HG1F/2F/2S/3F/4F, the device value for No. 1 in Settings for the selected Data Log channel
number is displayed on the chart.