IDEC High Performance Series - Manual (Page 865)

WindO/I-NV2 User’s Manual 14-27
3 Data Log Settings Dialog Box
14
Data Log Function
Auto-Setup Dialog Box and Data Settings Dialog Box
With the Auto-Setup dialog box, all the data for the selected channel is batch registered or changed.
With the Data Settings dialog box, the selected data for the selected channel is registered or changed.
Data No.: Displays 1 when the Auto-Setup dialog box was displayed by clicking Auto.
Displays the data number for the selected data when the Data Settings dialog box was displayed
by clicking Edit.
Display Type: Select the display type as Decimal or Hexadecimal for numerical values when data is output as
CSV.
Data Type: Select the data type for numerical values when data is output as CSV. For details, refer to Chapter
2 “1.2 Available Data” on page 2-2.
The data type that can be selected differs according to Data Size on the General tab.
When float32 is selected, the maximum number of digits for the integer part is 10 and the
number of digits for the decimal part is 5.
Text ID: Specifies the Text Manager ID number (1 to 32000) when text registered in Text Manager are used
for labels. For the Auto-Setup dialog box, Text ID is automatically configured sequentially
starting with the specified text ID.
Click to open Text Manager where you can edit the text.
Text ID can only be configured when you select the Use Text Manager check box.
Label: Enter the text to display as the label when data is output as CSV. The maximum number is 40
characters.
The default label is Data+number.
Example: Data001
This item is only displayed on the Data Settings dialog box when the Use Text Manager check
box is cleared.