IDEC High Performance Series - Manual (Page 1199)

WindO/I-NV2 User’s Manual 28-5
1 Project Transfer Function
28
Data T
ransf
er Func
tion
8 Click the Close button.
The project data for transfer is created in the Memory Card Folder on a memory card or USB flash drive.
For details about the created data folder and file structure, refer to Chapter 30 “External Memory Devices”
on page 30-1. When the destination is a USB flash drive, the folder and file structure in the Memory Card
Folder is the same as an SD memory card.
If the folder or file structure on the memory card folder is modified, the MICRO/I and WindO/I-NV2 will not
be usable.