IDEC High Performance Series - Manual (Page 1181)

WindO/I-NV2 User’s Manual 27-23
2 Web Server Function (HG3F/4F)
27
Maintenance
●
Data log page
The data log page shows data log data using the following procedure.
(This function can only be used when the data log is set in the project.)
1 Click the Logging Data link on the menu.
The logging data request form is displayed.
2 Select Device Log No. and click the OK button.
The logging data page is displayed showing the information set for the selected data number.
3 Select the range to show with Start and End.
This screen is an example.
Display item Description
Project Name
Shows the project name.
(When characters other than half-width alphanumeric characters are included on the English page,
the project name is shown as “-Wrong Strings-”.)
Device Log No.
Selects the channel number in the data log.
Only shows the numbers with Enable selected in the data log.
Start
Selects the start position (1 to 1024) for showing the data log. The larger the value, the more
recent the data.
When Start is smaller than End, the data is shown in ascending order (from old data to new data).
When larger, the data is shown in descending order (from new data to old data).
The display start position can only be selected when data log data exists.
End
Selects the end position (1 to 1024) for showing the data log.
For details, refer to Start above.
OK button
Confirms Device Log No.. When confirming Device Log No., the display range selected with Start
and End confirmed and the alarm log data in the range selected on the alarm log data page is shown.
Reset button Resets the display range selected with Device Log No., Start, and End to the default values.
• “Data Log” is shown as “Logging” on the web page.
• For details about the data log data, refer to Chapter 14 “Data Log Function” on page 14-1.