Data displa ys – IDEC High Performance Series User Manual

Page 669

Advertising
background image

WindO/I-NV2 User’s Manual

10-157

10 Calendar

10

Data Displa

ys

Data Type
Selects the data type to be handled by the condition formula.
Can only be set if While satisfying the condition is selected as Trigger Type.
For details, refer to Chapter 2 “1.2 Available Data” on page 2-2.

Device
Specifies the bit device or bit of the word device to serve as condition.
Can only be set if While ON or While OFF is selected as Trigger Type.

Click

to display the Device Address Settings dialog box. For the device address configuration procedure, refer

to Chapter 2 “5.1 Device Address Settings” on page 2-67.

Condition
Sets the condition formula.
Can only be set if While satisfying the condition is selected as Trigger Type.

Click

to display the Trigger Condition Settings dialog box. For the conditional expression configuration

procedure, refer to Chapter 2 “5.2 Setting Conditional Expressions” on page 2-69.

Not show Calendar

*1

When this check box is cleared, the part image is not displayed when the condition is not satisfied.

Comment
Used for entering comments about trigger conditions. Maximum number is 80 characters.

*1 HG2G-5F, HG3G/4G only

While ON:

Enables the Calendar when the value of device is 1.
Example: When the Not show Calendar check box is cleared under While not satisfying the

condition

While OFF:

Enables the Calendar when the value of device is 0.
Example: When the Not show Calendar check box is cleared under While not satisfying the

condition

While satisfying the condition:

Enables the Calendar when the condition is satisfied.
Example: When the Not show Calendar check box is cleared under While not satisfying the

condition

12/07 13:45

12/07 13:45

12/07 13:45

12/07 13:45

1

0

Show time

Hide time

Hide time

Hide time

Show time

Show time

Show time

Value of Device

Calendar state

Value of Device

1

0

Show time

Hide time

Show time

Show time

Hide time

Hide time

Hide time

Calendar state

12/07 13:45

12/07 13:45

12/07 13:45

Show time

Hide time

Show time

Hide time

12/07 13:45

Show time

12/07 13:45

Show time

12/07 13:45

Show time

12/07 13:45

Condition

Satisfied

Not satisfied

Calendar state

Advertising
This manual is related to the following products: