IDEC High Performance Series - Manual (Page 864)

3 Data Log Settings Dialog Box
14-26 WindO/I-NV2 User’s Manual
■ Settings
Settings is used to configure the details of the data to sample for each data number in the selected channel.
■ Auto
Batch registers or changes the settings for all the data.
Click this button to display the Auto-Setup dialog box. The details configured on the Auto-Setup dialog box are
registered for all the data.
For details, refer to “Auto-Setup Dialog Box and Data Settings Dialog Box” on page 14-27.
■ Edit
Registers or changes the settings for the selected data.
Select the data and click this button to display the Data Settings dialog box. The details configured on the Data
Settings dialog box are registered or changed for the selected data.
For details, refer to “Auto-Setup Dialog Box and Data Settings Dialog Box” on page 14-27.
Data No.: Shows the data numbers for the amount of data specified by Number of Data. Double clicking
the cell displays the Data Settings dialog box. The data number cannot be edited. For details,
refer to “Auto-Setup Dialog Box and Data Settings Dialog Box” on page 14-27.
Device: Shows the device as sequential numbers starting with the source device specified on the General
tab. Double clicking the cell displays the Data Settings dialog box. The device cannot be edited.
For details, refer to “Auto-Setup Dialog Box and Data Settings Dialog Box” on page 14-27.
Display Type: Shows the display type for numerical values when data is output as CSV. Double clicking the cell
displays the Data Settings dialog box where you can edit the data settings. For details, refer to
“Auto-Setup Dialog Box and Data Settings Dialog Box” on page 14-27.
Data Type: Shows the data type for numerical values when data is output as CSV. Double clicking the cell
displays the Data Settings dialog box where you can edit the data settings. For details, refer to
“Auto-Setup Dialog Box and Data Settings Dialog Box” on page 14-27.
Text ID: Shows the Text Manager ID number when text registered in Text Manager is used for labels.
Double clicking the cell opens Text Manager where you can edit the text.
Text ID is only displayed when you select the Use Text Manager check box.
Label: Shows the text to display as labels when data is output as CSV. Double clicking the cell allows you
to edit the label. The maximum number is 40 characters.
Text can only be entered when the Use Text Manager check box is cleared.
The default label is “Data” and the data number.
Example: Data001