IDEC High Performance Series - Manual (Page 394)

5 Key Button
8-70 WindO/I-NV2 User’s Manual
■ Scroll Size
Key Buttons Pg. Up and Pg. Dwn scroll the list up and down, respectively. Key Buttons Fcs. Up and Fcs. Dwn move
the focus up and down, respectively. This settings specifies the number of pages or lines (1 to 1023 lines) to scroll or
move the focus per each press of the button.
This setting is enabled only if Pg. Up, Pg. Dwn, Fcs. Up, and Fcs. Dwn are selected using the Key Browser.
■ Transfer Setting *1
Key Buttons Download Project, Upload Project, Copy Files, Download PLC Program, and Upload PLC
Program, perform the data transfer function specified by their names. These settings specify the source, data to be
transfered, and destination.
This setting is enabled only if one of these keys is selected after clicking Data Transfer in the Key Browser.
If Download Project is selected.
If Upload Project is selected.
*1 HG2G-5F, HG3G/4G only
Source: Select the the external memory where the project file to transfer (.ZNV) is stored: SD Memory Card
or USB Flash Drive.
File Path: Specify the path to the project file (.ZNV) to transfer. The maximum number is 247
characters.
Example: Where “HG3G_DEMO_1.ZNV” is a project file saved on the root directory of an
SD memory card or USB flash drive:
HG3G_DEMO_1.ZNV
Destination: Specify where to save the project uploaded from MICRO/I. Select the location:
SD Memory Card or USB Flash Drive.
Folder Path: Specify the path to the folder where the uploaded project file will be saved. The
maximum number is 247 characters.
Example: To save it to the folder “Uploaded_Project” on an SD memory card or USB flash
drive:
Uploaded_Project