IDEC High Performance Series - Manual (Page 1106)

2 Downloading
24-14 WindO/I-NV2 User’s Manual
2.1 Downloading Project Data to the MICRO/I
1 Change communication settings according to the connection method between the computer and the MICRO/I.
In the Communication Settings dialog box, select MICRO/I from Communicate with. To communicate with the
MICRO/I as an O/I Link Slave via an O/I Link Master, select O/I Link Slave. For details, refer to “1.3 Change
Communication Settings” on page 24-6.
2 Open a project to download.
3 On the Home tab, in the Project group, click the Download icon.
The Download dialog box is displayed.
4 Select data for download under Download Data.
■ All
Download the entire project data.
■ Modified Data Only
Downloads files modified since the previous download.
If download fails, select All to download.
■ Select Files
Download the specified files. Click Browse to display the Open Screens dialog box. Select Screen Type, select the
screen to be downloaded from Screen List and then click OK. The selected screen is added to the list.
2 Downloading
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
To download a project without opening it, on the Home tab, in the Project group, click the Download
icon. The Open dialog box is displayed. Select a file then click Open. The Download dialog box is displayed.
Proceed to Step
4 .
When project data is downloaded to the MICRO/I, the MICRO/I screen data is overwritten.
If the project data was changed, a confirmation message to save the project data is displayed.
• Click OK to save the project data and display the Download dialog box.
• Click Cancel to return to the editing screen without saving the project data.