IDEC High Performance Series - Manual (Page 591)

WindO/I-NV2 User’s Manual 10-79
5 Message Display
10
Data Displa
ys
●
Trigger Condition Tab
The Trigger Condition tab is displayed in Advanced mode.
The Message Display is enabled while the condition is satisfied, and it is disabled while the condition is not satisfied.
When disabled, the plate and flange are displayed, but the message is not displayed. For the HG2G-5F and the HG3G/
4G, select the operation when disabled as Not display message or Not show Message Display under While not
satisfying the condition.
■ Trigger Type
Selects the condition to enable the Message Display from the following.
Example: When Trigger Type is While ON, Device is LM 0, and While not satisfying the condition is Not
display message.
While LM 0 is 0, the condition is not satisfied and the Message Display does not display the message.
While LM 0 is 1, the condition is satisfied and the Message Display displays the message.
LM0:
MICRO/I
0
LM0: 1
HG SERIES
Condition
Not
satisfied
Condition
Satisfied
Show
Hide
Always visible: The Message Display is always enabled.
Message Display
state
Always show message
HG SERIES