IDEC High Performance Series User Manual

Page 560

Advertising
background image

3 Picture Display

10-48

WindO/I-NV2 User’s Manual

Flash
Select this check box to flash the displayed pictures.

Dynamic Position

*2

Select this check box to move and display the picture by specifying the coordinates of the picture as values of devices.

Dynamic Size

*2

Select this check box to scale the picture by specifying the size of the picture as values of devices.

*2 Advanced mode only

X Point: Specifies the word device that is the X-coordinate of the picture.

Click

to display the Device Address Settings dialog box. For the device address configuration

procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.

Y Point: Specifies the word device that is the Y-coordinate of the picture.

Click

to display the Device Address Settings dialog box. For the device address configuration

procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.

Example: When the X-coordinate is D 100 and the Y-coordinate is D 101

The picture is moved to the values of D 100 and D 101.

0

0

300

250

600

500

Position of picture to display

Y-coordinate device D 101 value

X-coordinate device D 100 value

0

0

300

250

600

500

Width: Specifies the word device that is the width of the picture.

Click

to display the Device Address Settings dialog box. For the device address configuration

procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.

Height: Specifies the word device that is the height of the picture.

Click

to display the Device Address Settings dialog box. For the device address configuration

procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.

Example: When the width device is D 100 and the height device is D 101

The picture is displayed with its size scaled to the values of D 100 and D 101.

When the size of pictures to switch differs and the Dynamic Size check box is cleared, all the pictures are
displayed with the same size as Pic0.

When moving and scaling pictures, set the values of devices so the picture is not moved or scaled outside
the screen's display area.

180

120

360

240

720

480

180

120

360

240

720

480

Size of picture to display

Height device D 101 value

Width device D 100 value

Advertising
This manual is related to the following products: