IDEC High Performance Series - Manual (Page 702)

2 Line Chart
11-30 WindO/I-NV2 User’s Manual
■ Line Type
Selects the type of line from the following.
Solid, Dot, Dash, Long Dash, Long Dash Dot, Long Dash Dot Dot
■ Line Size
Selects the line size from the following.
1 dot, 2 dots, 3 dots, 5 dots
■ Line Color
Selects the line color for the chart (color: 256 colors, monochrome: 16 shades).
Click this button to display the Color Palette. Select a color from the Color Palette.
■ Set
Registers the chart settings to the list. If you select a Ch number that is already registered, that number is overwritten
with the new settings.
Select a Ch number on the list and click this button to register the settings for the Data Log Channel No. and Data
No. and the chart Line Type, Line Size, and Line Color.
Always register the settings from Ch1.
■ Insert
Inserts the chart settings in the position selected on the list.
Select a Ch number on the list and click this button to insert the settings for the Data Log Channel No. and Data
No. and the chart Line Type, Line Size, and Line Color. The settings at the insertion point shift down one line.
Settings cannot be inserted if all Ch numbers are configured.
■ Remove
Deletes the registered settings from the list.
Select a Ch number and click this button to delete the selected settings from the list.