IDEC High Performance Series - Manual (Page 626)

7 Alarm List Display
10-114 WindO/I-NV2 User’s Manual
■ Screen No. Setting Method
Selects the setting method for the screen numbers on the reference screen list.
■ (Reference Screen List)
Displays a list reference screen numbers and screen titles that have been set to messages.
Serial: Continuously and automatically specifies screen numbers (1 to 3000) that are at or below the
selected message number.
Example 1: When screen number “100” has been entered for message number 1-0.
Screen numbers “100”, “101”, “102”....are automatically specified in order from message
number 1-0.
Example 2: When screen number “200” has been entered for message number 1-5.
Message numbers 1-0 to 1-4 are left unchanged and screen numbers “200”, “201”,
“202”....are automatically specified in order from message number 1-5.
Random: Specifies a reference screen number (1 to 3000) for each message number.
Message No.: Displays the message number.
Screen No.: Displays the reference screen number.
The screen number can be set according to the Screen No. Setting Method. The screen number is
specified in the screen number input dialog box that appears after double clicking on a cell. Enter a
screen number (1 to 3000) into Screen No. and then click OK.
When there is not screen for the specified screen number a message confirming the creation of a new
screen will appear.
If Yes is clicked, a screen will be created but if No is clicked, you will be returned to the Options screen
without creating a screen.
Title: Displays the title of a reference screen.
When editing a title, editing is performed in the Enter Title dialog box that appears after double
clicking on a cell. Edit the title and then click OK.
The title can be edited only when the screen number has already been set.