IDEC High Performance Series - Manual (Page 1164)

1 Web Server Function (HG2G-5F, HG3G/4G)
27-6 WindO/I-NV2 User’s Manual
1.6 Monitoring
You can remotely monitor the state of the HG2G-5F, HG3G/4G from a web browser. Click the link for each page on the
left frame to show the desired page.
●
Homepage
If you successfully access the HG2G-5F, HG3G/4G, the homepage is displayed.
See example below.
The HG2G-5F, HG3G/4G information shown on the homepage is listed below.
Display item Description
Mode
Shows the system’s current mode.
• Run Mode
• System Mode
• Monitor Mode
• Simulation Mode
• Data Transfer Mode
Error
Shows the following errors.
• Host Communication Error
• No Screen Data
• Waiting for Default Screen No.
• Processing Error
• Backup Data Lost
• Network Off Line
• Device Range Error
• Script Error
System
Model No. Shows the MICRO/I model number.
Project Name
Shows the project name.
(When characters other than half-width alphanumeric characters are
included on the English page, the project name is shown as “-Wrong Strings-
”.)
System Version Shows the MICRO/I system software version.
HG System Time
(m/d/y h:m:s) Shows the date and time of the MICRO/I's internal clock when the page was
acquired.
Host I/F
Driver Name Shows the host interface driver name.
Driver Version Shows the host interface driver version.
O/I Link
Baud Rate [bps] Shows the O/I link communication speed.
Type Shows the O/I link master station or slave station number.
Slave Registration Settings Shows the slave registration setting register for the O/I link communication master.
Slave Online Status
Shows the slave online information register for the O/I link communication master.
• For details about error messages, refer to Chapter 35 “1.1 Errors Displayed on the Screen” on page 35-1.
• For details on O/I Link, see Chapter 3 “O/I Link Communication Interface” in the External Device Setup
Manual.