IDEC High Performance Series - Manual (Page 866)

3 Data Log Settings Dialog Box
14-28 WindO/I-NV2 User’s Manual
●
Options Tab
The Options tab only appears in Advanced mode. To switch to Advanced mode, click Advanced on the Data Log
Settings dialog box.
To display the data saved in the data storage area as numerical values on the MICRO/I, copy this data to the specified
internal device.
■ Copy Data Log Data
Select this check box to copy data to a device.
*1 HG2G-5F, HG3G/4G only
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
Destination Device: Specifies the destination device for copied data. You can only specify an internal device.
For the device address configuration procedure, refer to Chapter 2 “5.1 Device Address Settings”
on page 2-67.