IDEC High Performance Series - Manual (Page 678)

1 Bar Chart
11-6 WindO/I-NV2 User’s Manual
■ Reference Device
Specifies the source word device for the data to display in the chart.
Click to display the Device Address Settings dialog box. For the device address configuration procedure, refer
to Chapter 2 “5.1 Device Address Settings” on page 2-67.
■ Foreground Color
■ Background Color
■ Pattern
Selects the chart pattern.
Click this button to display the Pattern Palette. Select a pattern from the Pattern Palette.
■ Set
Registers the chart settings to the list. If you select a Ch number that is already registered, that number is overwritten
with the new settings.
Select a Ch number on the list and click this button to register the Reference Device, Foreground Color,
Background Color, and Pattern settings.
■ Insert
Inserts the chart settings in the position selected on the list.
Select a Ch number on the list and click this button to insert the Reference Device, Foreground Color,
Background Color, and Pattern settings. The settings at the insertion point shift down one line. Settings cannot be
inserted if all Ch numbers are configured.
■ Remove
Deletes the registered settings from the list.
Select a Ch number and click this button to delete the selected settings from the list.
*1 Advanced mode only
Normal, Data Over *1 : Selects the foreground color for the chart when normal and when data over (color: 256
colors, monochrome: 16 shades).
Click either button to display the Color Palette. Select a color from the Color Palette.
Normal, Data Over *1 : Selects the background color for the chart when normal and when data over (color: 256
colors, monochrome: 16 shades).
Click either button to display the Color Palette. Select a color from the Color Palette.