IDEC High Performance Series - Manual (Page 198)

1 Creating and Manipulating WindO/I-NV2 Project Data
4-12 WindO/I-NV2 User’s Manual
●
Saving project data as project data for Downloader
You can convert the project data being edited to data that can be used with Downloader and save it.
For details about Downloader, see the Downloader manual.
1 Click , then click to the right of Save As, and then click Other Formats.
The Save As Project Data for Downloader dialog box is displayed.
2 Check Communication Settings and click Download.
The communication speed and port used when communicating with the MICRO/I using Downloader are configured
here.
To change Communication Settings, click Change to display the Communication Settings dialog box. Change
Communicate with, Port, and Baud Rate. For details, refer to Chapter 24 “1 Communicating with the MICRO/I”
on page 24-1.
Using the Download Project dialog box, convert the WindO/I-NV’s project data to data that can be used
with Downloader.