IDEC High Performance Series - Manual (Page 199)

WindO/I-NV2 User’s Manual 4-13
1 Creating and Manipulating WindO/I-NV2 Project Data
4
Project Set
tings
3 Enter project name and then click Save.
A download confirmation message is displayed.
4
Click Yes.
The Download Project dialog box is displayed and the data conversion process begins.
When the data conversion and saving process ends, a completion message is displayed.
5 Click OK.
You are returned to the Download Project dialog box.
6 Click Close.
• You cannot use the following characters in the project name.
. \ / : * ? “ < > |
• You cannot create project data in read-only folders or in WindO/I-NV2’s working folders (temporary
folders that start with “~”).