IDEC High Performance Series - Manual (Page 604)

6 Message Switching Display
10-92 WindO/I-NV2 User’s Manual
■ Change Color
Select this check box to configure Text Color and Plate Color per Msg number.
When this check box is cleared, the colors are configured by Text Color on the Format tab and Plate Color on the
View tab.
■ Set
Registers the message and color settings to the list. If you select a Msg number that is already registered, that
number is overwritten with the new settings.
Select a Msg number on the list and click this button to register the Message and Change Color settings.
■ Insert
Inserts the message and color settings in the position selected on the list.
Select a Msg number on the list and click this button to insert the Message and Change Color settings. The settings
at the insertion point shift down one line. Settings cannot be inserted if all Msg numbers are configured.
■ Remove
Deletes the registered settings from the list.
Select a Msg number and click this button to delete the selected settings from the list.
Text Color: Selects the text color for the messages when configuring the text color per Msg number (color:
256 colors, monochrome: 16 shades).
Click this button to display the Color Palette. Select a color from the Color Palette.
Plate Color: Selects the plate color for the messages when configuring the plate color per Msg number
(color: 256 colors, monochrome: 16 shades).
Click this button to display the Color Palette. Select a color from the Color Palette.