IDEC High Performance Series - Manual (Page 608)

6 Message Switching Display
10-96 WindO/I-NV2 User’s Manual
■ Vertical Writing
Select this check box when displaying text vertically.
Can only be set when Font is set to Japanese, European, Chinese, Taiwanese, Korean, Central European,
Baltic, or Cyrillic.
■ Text Color
Selects the color of displayed text (color: 256 colors, monochrome: 16 shades).
Click Color to display the Color Palette. Select a color from the Color Palette.
■ Scroll *2
Select this check box to enable scrolling display displaying of messages.
This option can only be configured when Standard is selected for Image Type on the View tab.
*2 Advanced mode only
When the Vertical Writing check box is selected, take care about the following points. This is applicable
for Windows supports East Asian characters.
• When there is a mixture of double-byte and single-byte characters, the half-width characters are left-
aligned.
• Dashes are displayed horizontally. Symbols representing voiced and semi-voiced sounds of single-byte
characters are shown as follows.
Aligned to
leŌ edge
Horizontal
display
Next
characters
Speed (1: Fastest): Sets the scrolling speed (1 to 10). 1 is fastest, 10 is slowest.
When the Scroll check box is selected operation is follows.
• Messages that include CRs are displayed without the CRs.
• Messages scroll in the direction in which the text is drawn.
• When the message is switched, the message is scrolled from the beginning.
When the Scroll check box is selected, take care about the following points.
• The number of parts that can be arranged on a single screen decreases. If the MICRO/I displays an error
message, clear the Scroll check box, or reduce the number of parts on the screen.
• When the scan time is long, scrolling speed may become slow.