IDEC High Performance Series User Manual
Page 922
4 Using the Data
17-14
WindO/I-NV2 User’s Manual
4.2 Notifying with a Beep when the Counted Operation Time Reaches the Threshold
1
On the Configuration tab, in the System Setup group, click Preventive Maintenance.
The Preventive Maintenance Settings dialog box is displayed.
2
Specify the number of devices to monitor in Number of Items.
3
Select the number to register the Preventive Maintenance settings to in Settings, then click Edit.
The Individual Settings dialog box is displayed.
4
Specify the bit device or bit of the word device to monitor with Monitor Device.
5
Select the Measure Operation Time check box on the Operation Time tab and specify the destination device for
the counted operation time.
6
Select the data type for the Measure Operation Time device value with Data Type.