IDEC High Performance Series - Manual (Page 938)

3 Recipe Settings Dialog Box
18-12 WindO/I-NV2 User’s Manual
●
Channel Tab
The Channel tab is used to configure the recipe name for the selected channel and the devices to read and write
values to.
■ Channel
Shows the block number and the channel number for the selected channel.
■ Recipe Function
Selects whether or not to use the Recipe function.
■ Recipe Name
Enter the name for the Recipe function to differentiate the channel. The maximum number is 40 characters. The
default is “Recipen”. (n: 4 digit sequential number)
■ Top Device
Specifies the start device of the destination devices for recipe values and the source devices for device values.
Click to display the Device Address Settings dialog box. For the device address configuration procedure, refer
to Chapter 2 “5.1 Device Address Settings” on page 2-67.
The specified device addresses are configured sequentially from the number 1 in Data List on the Data tab.
■ Data Type
Selects the type of data for recipe values to write and device values that are read. For details, refer to Chapter 2 “1.2
Available Data” on page 2-2.
■ Number of Data
Specifies the number of source or destination devices starting with the device address configured by Top Device.
The sequential devices from the start address for the number of configured devices is displayed in Settings on the
Data tab.
The amount of data that can be set varies based on the data type. When BIN16 (+), BIN16 (+/-), or BCD4 is
selected for Data Type, up to 8192 items of data can be configured. When BIN32 (+), BIN32 (+/-), or BCD8 is
selected, up to 4096 items of data can be configured.
■ Display Type
Selects the display type for Data in Data List configured on the Data tab as Decimal or Hexadecimal.
Values when saving data to a recipe file are decimal.
Block No.: Shows the block number for the channel selected in Settings.
Channel No.: Shows the channel number for the channel selected in Settings.
Enable: Writes recipe values to devices, reads device values and saves them to the memory card as a
recipe file.
Disable: The Recipe function is not used.