IDEC High Performance Series - Manual (Page 1169)

WindO/I-NV2 User’s Manual 27-11
1 Web Server Function (HG2G-5F, HG3G/4G)
27
Maintenance
The following items can be specified on the remote operation page.
■ Picture Format
Specify the image format to use in remote operation.
■ Control Options
Operation restrictions prohibit operation from other computers or the touch panel of the HG2G-5F, HG3G/4G while the
HG2G-5F, HG3G/4G is being remotely controlled.
■ [Maximize]
Hides the left frame, page title, and screen format settings, and shows only the HG2G-5F, HG3G/4G screen image.
The screen format settings are the same as before clicking the [Maximize] link.
65536 Color JPEG Format (Slow): Capable of showing the screen image displayed on the HG2G-5F, HG3G/4G in
the web browser without degradation. However, the update speed of the web
browser display is slower than 256 Color Bitmap Format (Fast) and the
HG2G-5F, HG3G/4G screen update speed also slows down.
256 Color Bitmap Format (Fast): Shows the screen image displayed on the HG2G-5F, HG3G/4G reduced to 256
colors. The screen image displayed on the HG2G-5F, HG3G/4G is somewhat
degraded, but the update speed of the display on the web browser speeds up
and the impact on the HG2G-5F, HG3G/4G screen update speed is reduced.
(The screen update speed of the 256 color bitmap format tends to be faster
than the 65536 color JPEG format, but it may be slower depending on the
screen's displayed content.)
Disable Control From Other Clients: Check to prohibit remote control from other computers. When this function is
enabled, if a web browser is already accessing the HG2G-5F, HG3G/4G, the
message Remote Control is disabled by other client will be displayed on
the other browser and access is denied. When disabled, the HG2G-5F, HG3G/
4G can be accessed from multiple web browsers.
Disable Control From Touch Panel: Check to prohibit control with the HG2G-5F, HG3G/4G touch panel. When this
function is enabled, if a web browser is already accessing the HG2G-5F,
HG3G/4G, the message Touch panel is disabled by Remote Control
Function will be displayed on MICRO/I and operation by the MICRO/I touch
panel is not possible. When disabled, control by the MICRO/I touch panel is
possible.