IDEC High Performance Series - Manual (Page 1182)

2 Web Server Function (HG3F/4F)
27-24 WindO/I-NV2 User’s Manual
4 Click the OK button.
The data for the data log in the selected range is displayed.
See example below.
Display item Description
Project Name
The same as the logging data request form.
You can change the range to display the data log without returning to the logging
data request form.
Device Log No.
Start
End
OK
Reset
(Data list)
Source Shows the device for the data log.
Sampling Method Shows the sampling method.
Device / Period [sec]
The displayed content differs according to Sampling Method.
When Fixed Period, it shows the cycle time to sample in seconds. Data is
sampled per the specified cycle time (seconds).
When Event Bit or Event Word, it shows the device for the sampling
method. The data is sampled when the device's value changes.
Sampling Time Shows the date and time when the data was sampled.
Data Shows the sampled data.
(Data list)
When using a web browser terminal with a slow processing speed such as a PDA, and if the display range
is large, it may take a few minutes for the data to display.