IDEC High Performance Series - Manual (Page 417)

WindO/I-NV2 User’s Manual 8-93
5 Key Button
8
Bu
tton
s
9 Select Multimedia Function and click Stop.
You are returned to the Properties of Key Button dialog box.
10 Click OK.
Close the Properties of Key Button dialog box.
This concludes configuring the record function and key buttons.
Operating Procedure
The MICRO/I must be connected to a video camera and microphone.
1 Press the Rec. button.
The MICRO/I starts recording images and sound.
2 Press the Stop button.
The MICRO/I stops recording images and sound.
The recorded images and sound are saved as an MP4 file in the following folder on the memory card.
\Memory card folder\RECORD\Year month day (format: YYYYMMDD)
The memory card folder name is configured in the Project Settings dialog box. For details, refer to Chapter 30 “1.5
Setting the Memory Card Folder” on page 30-16.
The “year month day” folder name is the date the file was recorded.
The file name for the recorded file is the time the file was saved.
Recording stops when the maximum recording time (30 sec.) has elapsed, even if the Stop button is not
pressed.
• Movie files cannot be recorded during playback.
• While data is being recorded after an event occurs with the event recording function and while recorded
data is being saved to the memory card, recording cannot be executed with parts. Also, during these
situations, the value of HG special internal register LSD155-0 changes to 1. For details, refer to Chapter
32 “HG Special Registers (LSD)” on page 32-5.
The signal standard for the video camera connected to the MICRO/I is configured in the Multimedia
Settings dialog box, on the Video Input tab. For details, refer to Chapter 22 “2.3 Configuring the Video
Input” on page 22-11.