IDEC High Performance Series - Manual (Page 849)

WindO/I-NV2 User’s Manual 14-11
2 Data Log Function Configuration Procedure
14
Data Log Function
14 Enter the text to display in the data label in Label.
The text entered here is the label row for the data number columns when the data is output as CSV.
If you selected the Use Text Manager check box on the Data tab, specify the ID number for the text to use in the
label.
15 Click OK to close the Data Settings dialog box.
You are returned to the Individual Settings dialog box.
To individually register Data Log settings, repeat steps 10 through 14 .
16 Click OK to close the Individual Settings dialog box.
You are returned to the Data Log Settings dialog box.
17 Repeat steps 2 through 16 to register Data Log settings for all of the channel numbers to use.
18 Specify the Data log data storage amount per device.
■ For the HG2G-S/-5S/-5F and HG3G/4G
Click
for Number of Stored Data for Data Log per Device to display the Data Storage Area Management
dialog box.
Increase the number for Number of Stored Data for Data Log per Device.
Click OK to close the Data Storage Area Management dialog box.