IDEC High Performance Series - Manual (Page 853)

WindO/I-NV2 User’s Manual 14-15
3 Data Log Settings Dialog Box
14
Data Log Function
■ Number of Stored Data for Data Log per Device
Shows the maximum amount of data storage per device for Data Log data saved in the data storage area. If data is
saved up the maximum amount and then the maximum is exceeded, the old data is deleted and the new data is saved.
■ Number of Stored Data for Alarm Log *4
Shows the maximum amount of alarm log data saved in the data storage area.
Click to display the Data Storage Area Management dialog box where you can change the allocation of data
storage area memory.
For details, refer to Chapter 16 “Data Storage Area” on page 16-1.
■ Number of HG Keep Register (LKR) *4
Shows the number of HG keep register (LKR) addresses.
Click to display the Data Storage Area Management dialog box where you can change the allocation of data
storage area memory.
For details, refer to Chapter 16 “Data Storage Area” on page 16-1.
■ Number of HG Keep Relay (LK) *4
Shows the current number of HG keep relay (LK) addresses.
Click to display the Data Storage Area Management dialog box where you can change the allocation of data
storage area memory.
For details, refer to Chapter 16 “Data Storage Area” on page 16-1.
*4 HG1F/2F/2S/3F/4F only
HG2G-S/-5S/-5F, HG3G/4G: The default is 0.
Click to display the Data Storage Area Management dialog box where you
can change the allocation of data storage area memory. For details, refer to
Chapter 16 “Data Storage Area” on page 16-1.
HG1F/2F/2S/3F/4F: The default is 0.
Change the alarm log data storage amount and the HG keep register (LKR) and
HG keep relay (LK) addresses to set the maximum amount of data storage per
device.