IDEC High Performance Series - Manual (Page 98)

5 WindO/I-NV2 Common Operations and Settings
2-68 WindO/I-NV2 User’s Manual
■ Tag Editor
Opens the Tag Editor.
With the Tag Editor, you can display the list of device addresses used in the project data being edited and configure
tag names and comments for device addresses.
Allen-Bradley address settings
When Allen-Bradley is selected in Expression of Device Address Format on the Select Host I/F Driver dialog
box or the Change Host I/F Driver dialog box,
is displayed to the right of Address on the Device Address Settings
dialog box. Click this button to display the Address Setting for Allen-Bradley dialog box. With this dialog box, you can
easily enter the device address following Allen-Bradley PLC address notation.
For the other settings, see the External Device Setup Manual.
Tag names and comments configured in the Tag Editor can be used in WindLDR and WindCFG.
Device Type: Shows the device type selected in the Device Address Settings.