IDEC High Performance Series - Manual (Page 378)

4 Print Button
8-54 WindO/I-NV2 User’s Manual
■ Print Time stamp
Adds the date and time of printing to the screenshot before sending it to the printer.
The date and time format depends on the language selected in Language. Language is available on the Project
Details tab of the Project Settings dialog box.
The display formats are shown below:
• Japanese: YYYY *2 /MM/DD HH:MM
• English: MM/DD/YYYY *2 HH:MM
YYYY: year, MM: month, DD: day, HH: hour, MM: minute
■ View Switching Method *3
Select how to display the ON/OFF status of the button.
*1 This is applicable for models with the memory card interface only.
*2 Only last two digits of year shown on the HG1F/2F/2S/3F/4F.
*3 Advanced mode only
*4 HG2G-5F, HG3G/4G only
Button: Pressing the button changes the drawing object displayed.
Device: The drawing objects assigned to the OFF and ON states are displayed when the value of the device is
0 and 1, respectively. Specifies the device used to switch the drawing object display.
Click
to display the Device Address Settings dialog box. For the device address configuration
procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.
No Image: The button is not displayed on the screen. The button appears as a dashed line frame on the edit
screen. Pressing the corresponding area on the MICRO/I activates the assigned function. If No
Image is selected, the settings for View and Registration Text are disabled.
Selecting Device in View Switching Method allows you to create an illuminated pushbutton.
The illuminated pushbutton switches state (or image) according to ON or OFF state of the device address,
allowing you to display the state of a device that is being operated.
Example: When you set a host device 'M0' as Device in View Switching Method, if the value of M0
changes, the display image will switched according to the value of M0 even if the button is not
pressed.
0
M0
1
M0
MICRO/I Host device
View Switching Method (Device): M0
OFF image:
ON image:
• These operations cannot be performed simultaneously.
- Outputting to the memory card by pressing the Print Button. *1
- Outputting to the printer by pressing the Print Button.
- Printing alarm logs
*4
• It may take some time to output screenshots when copying files using the USB Autorun function or a Key
Button.
• The HG2G-5F, HG3G/4G cannot stop printing in the middle of a page, even when the print job is
canceled. Print jobs after the current print job are canceled after the current page finishes printing.
• When printing a screenshot from the HG3F/4F using SII DPU-414 printer, the printed image will only
include 320 pixels from the left edge of the screen.
The maximum number of screenshots that can be captured (1 to 999) can be set in HG Special Registers
LSD65. (Default: 99)