IDEC High Performance Series - Manual (Page 846)

2 Data Log Function Configuration Procedure
14-8 WindO/I-NV2 User’s Manual
This section describes the configuration procedure for the Data Log function.
2.1 Configuring the Sampling Condition and Devices for Sampling Data
1 On the Configuration tab, in the System Setup group, click Data Log.
The Data Log Settings dialog box is displayed.
2
Select the channel number to register the Data Log settings to in Settings, then click Edit.
The Individual Settings dialog box is displayed.
2 Data Log Function Configuration Procedure
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F