IDEC High Performance Series - Manual (Page 929)

WindO/I-NV2 User’s Manual 18-3
1 Overview
18
R
ec
ipe
Func
tion
1.3 Data Configuration
The relationship between the Recipe function settings and the data for recipes is as follows.
1. Number of blocks: The operation using the data for recipes is configured in blocks (0 to 64). 1 block is 16 channels.
2. Channels: Destination devices and recipe values are configured in channels. 1 channel is used for 1 item
of data for the recipe.
3. Amount of data: The amount of data configured for one channel. The maximum amount of data that can be
configured is 8192.
4. Top device: The start device of the destination devices for recipe values and the source devices for device
values.
5. Data: The values to write to the devices.
ϲϲϲϲ
ϳϳϳϳ
ϴϴϴϴ
ϵϵϵϵ
ϭϭϭϭϭ
ϭϭϭϭ
ϮϮϮϮ
ϯϯϯϯ
ϰϰϰϰ
ϱϱϱϱ
ϭϬϱ
ϭϬϲ
ϭϬϳ
ϭϬϴ
ϭϬϵ
ϭϬϬ
ϭϬϭ
ϭϬϮ
ϭϬϯ
ϭϬϰ
ϲϬϬ
ϳϬϬ
ϴϬϬ
ϵϬϬ
ϭϬϬϬ
ϭϬϬ
ϮϬϬ
ϯϬϬ
ϰϬϬ
ϱϬϬ
ϭϬϲ
ϭϬϳ
ϭϬϴ
ϭϬϵ
ϭϭϬ
ϭϬϭ
ϭϬϮ
ϭϬϯ
ϭϬϰ
ϭϬϱ
ϱ͘ĂƚĂ ϰ͘dŽƉĚĞǀŝĐĞ
ϭ͘EƵŵďĞƌŽĨďůŽĐŬƐ
Ϯ͘ŚĂŶŶĞůϭƚŽϭϲ
ϯ͘ŵŽƵŶƚ
ŽĨĚĂƚĂ
Recipe settings
Data for recipes
If there are many word devices for the data for the recipe, it will take time to read and write them. For
example, when using the Recipe function to configure initial values, if other processes are executed before
the function is finished writing all the settings, you may experience unexpected results. Monitor System
Area 2 Transferring recipe bit (address+3, bit4) while the recipe is transferring and wait until reading and
writing the data for the recipe is finished before executing other processes. For details, refer to Chapter 4
“System Area” on page 4-32.