Dell PowerEdge M805 - Manual (Page 100)

62 Using the CLI
www
.dell.com | support.dell.com
Router OSPFv3 Config From Global
Configuration mode,
use the ipv6 router
ospf command. console(config-
rtr)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode
IPv6 DHCP Pool Mode From Global
Configuration mode,
use the ipv6 dhcp pool
command. console(config-
dhcp6s-pool)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode
Interface Configuration Modes
Ethernet From Global
Configuration mode,
use the interface
ethernet command. console (config-
if-n/gn
or n/xgn)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
Port Channel From Global
Configuration mode,
use the interface port-
channel command. console (config-
if-chn)#
To exit to Global
Configuration
mode, use the exit
command, or
<Ctrl>+<Z> to
Privileged EXEC
mode.
VLAN From Global
Configuration mode,
use the interface vlan
command. console(config-if-
vlann)#
To exit to Global
Configuration
mode, use the exit
command, or press
<Ctrl>+<Z> to
Privileged EXEC
mode.
Command Mode Access Method Command Prompt Exit or Access
Previous Mode