Dell PowerEdge M805 - Manual (Page 592)

596 IGMP Commands
www
.dell.com | support.dell.com
Syntax
ip igmp last-member-query-count count
no ip igmp last-member-query-count
• count—Query count. (Range: 1-20)
Default Configuration
The default last member query count is 2.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets 10 as the number of VLAN 2 Group-Specific Queries.
console#configure
console(config)#interface vlan 2
console(config-if-vlan2)#ip igmp last-member-query-count 10
console(config-if-vlan2)#no ip igmp last-member-query-count
ip igmp last-member-query-interval
Use the ip igmp last-member-query-interval command in Interface Configuration mode to
configure the Maximum Response Time inserted in Group-Specific Queries which are sent in
response to Leave Group messages.
Syntax
ip igmp last-member-query-interval tenthsofseconds
no ip igmp last-member-query-interval
• tenthsofseconds—Maximum Response Time in tenths of a second (Range: 0-255)
Default Configuration
10 is the default Maximum Response Time value in tenths of a second.
Command Mode
Interface Configuration (VLAN) mode