Router rip – Dell PowerEdge M805 User Manual
Page 788
796
Routing Information Protocol (RIP) Commands
www
.dell.com | support.dell.com
redistribute ospf [metric integer] [match [internal] [external 1] [external 2]
[nssa-external 1] [nssa-external 2]]
no redistribute ospf
redistribute { static | connected} [metric integer]
no redistribute
•
metric integer—Specifies the metric to use when redistributing the route. Range: 0-15.
•
match internal—Adds internal matches to any match types presently being redistributed.
•
match external 1—Adds routes imported into OSPF as Type-1 external routes into any
match types presently being redistributed.
•
match external 2—Adds routes imported into OSPF as Type-2 external routes into any
match types presently being redistributed.
•
match nssa-external 1—Adds routes imported into OSPF as NSSA Type-1 external
routes into any match types presently being redistributed.
•
match nssa-external 2—Adds routes imported into OSPF as NSSA Type-2 external
routes into any match types presently being redistributed.
•
static—Redistributes static routes.
•
connected— Redistributes directly-connected routes.
Default Configuration
metric integer—not configured
match—internal
Command Mode
Router RIP Configuration mode.
User Guidelines
This command has no user guidelines.
Example
console(config-router)#redistribute ospf metric 10 match nssa-
external 1
console(config-router)#redistribute connected metric 1
router rip
Use the router rip command in Global Configuration mode to enter Router RIP mode.
Syntax
router rip