Rmon commands, Rmon alarm, 29 rmon commands – Dell PowerEdge M805 User Manual
Page 413
RMON Commands
405
RMON Commands
rmon alarm
Use the rmon alarm command in Global Configuration mode to configure alarm conditions. To
remove an alarm, use the no form of this command. Also see the related show rmon alarm
command.
Syntax
rmon alarm index variable interval rthreshold fthreshold revent fevent [type type] [startup
direction] [owner name]
no rmon alarm index
•
index—The alarm index. (Range: 1 - 65535)
•
variable—A fully qualified SNMP object identifier that resolves to a particular instance of
an MIB object.
•
interval—The interval in seconds over which the data is sampled and compared with the
rising and falling thresholds. (Range: 1 - 4294967295)
•
rthreshold—Rising Threshold. (Range: 0 - 4294967295)
•
fthreshold—Falling Threshold. (Range: 0 - 4294967295)
•
revent—The index of the Event that is used when a rising threshold is crossed. (Range: 1-
65535)
•
fevent—The Event index used when a falling threshold is crossed. (Range: 1- 65535)
•
type type—The sampling method for the selected variable and calculating the value to be
compared against the thresholds. If the method is absolute, the value of the selected
variable is compared directly with the thresholds at the end of the sampling interval. If
the method is delta, the selected variable value at the last sample is subtracted from the
current value, and the difference compared with the thresholds.