Dell PowerEdge M805 - Manual (Page 57)

Command Groups 19
Configuration and Image Files Commands
QoS Commands
Command Description Mode*
boot system Specifies the system image that the switch loads at startup. PE
clear config Restores switch to default configuration PE
copy Copies files from a source to a destination. PE
delete backup-image Deletes a file from a flash memory. PE
delete backup-config Deletes the backup configuration file PE
delete startup-config Deletes the startup configuration file. PE
filedescr Adds a description to a file. PE
ftpdownload Updates the backup image on the switch. PE
script apply Applies commands in the script to the switch. PE
script delete Deletes a specific script. PE
script list Lists all scripts present in the switch. PE
script show Displays the contents of a script file. PE
script validate Validates a script file. PE
show backup-config Displays contents of a backup configuration file PE
show bootvar Displays the active system image file that the switch loads
at startup. UE
show dir Lists all the files available on the flash file system. PE
show running-config Displays the contents of the currently running
configuration file. PE
show startup-config Displays the startup configuration file contents. PE
update bootcode Updates the bootcode on one or more switches. PE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
assign-queue Modifies the queue ID to which the associated traffic
stream is assigned. PCMC
class Creates an instance of a class definition within the
specified policy for the purpose of defining treatment of
the traffic class through subsequent policy attribute
statements. PMC