Dell PowerEdge M805 - Manual (Page 134)

100 AAA Commands
www
.dell.com | support.dell.com
Default Configuration
Uses the default set with the command aaa authentication enable.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies the default authentication method when accessing a higher
privilege level console.
console(config)# line console
console(config-line)# enable authentication default
enable password
Use the enable password command in Global Configuration mode to set a local password to
control access to the normal level. To remove the password requirement, use the no form of this
command.
Syntax
enable password password [encrypted]
no enable password
• password—Password for this level (Range: 8- 64 characters).
• encrypted—Encrypted password entered, copied from another switch configuration.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines password "xxxyyyzzz" to control access to user and privilege
levels.
console(config)# enable password xxxyyyzzz