Dell PowerEdge M805 - Manual (Page 83)

Command Groups 45
PIM-SM Commands
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
ip pimsm Sets administrative mode of PIM-SM multicast routing
across the router to enabled. GC
ip pimsm cbsrhasmasklength Configures the CBSR hash mask length to be advertised in
bootstrap messages for a particular PIM-SM interface. IC
ip pimsm cbsrpreference Configures the CBSR preference for a particular PIM-SM
interface. IC
ip pimsm crppreference Configures the Candidate Rendezvous Point (CRP) for a
particular PIM-SM interface. IC
ip pimsm message-interval Configures the global join/prune interval for PIM-SM
router. GC
ip pimsm mode Sets to enabled the administrative mode of PIM-SM
multicast routing on a routing interface. IC
ip pimsm query-interval Configures the transmission frequency of hello messages in
seconds between PIM enabled neighbors. IC
ip pimsm register-rate-limit Sets the Register Threshold rate for the RP (Rendezvous
Point) router to switch to the shortest path. GC
ip pimsm spt-threshold Configures the threshold rate for the RP router to switch to
the shortest path. GC
ip pimsm staticrp Creates RP IP address for the PIM-SM router. GC
ip pim-trapflags Enables the PIM trap mode for both Sparse Mode (SM)
and Dense Mode (DM). GC
show ip pimsm Displays the system-wide information for PIM-SM. PE
show ip pimsm componenttable Displays the table containing objects specific to a PIM
domain. PE
show ip pimsm interface Displays interface information for PIM-SM on the
specified interface. PE
show ip pimsm interface stats Displays the statistical information for PIM-SM on the
specified interface. UE
show ip pimsm neighbor Displays neighbor information for PIM-SM on the
specified interface. PE
Command Description Mode*