Dell PowerEdge M805 - Manual (Page 497)

Syslog Commands 491
Syntax
level level
no level
• level—The level number for syslog messages. (Range: emergency, alert, critical, error,
warning, notice, info, debug)
Default Configuration
The default value for level is info.
Command Mode
Logging mode
User Guidelines
After entering the view corresponding to a specific syslog server, the command can be
executed to set the importance level for syslog messages.
Example
The following example sets the syslog message importance level to alert.
console(config-logging)#level alert
logging cli-command
Use the logging cli-command in Global Configuration mode to enable CLI command logging.
Syntax
logging cli-command
no logging cli-command
Default Configuration
Disabled
Command Mode
Global Configuration
User Guidelines
To see the CLI commands by using the show logging command.
Example
console(config)#logging cli-command