Dell PowerEdge M805 - Manual (Page 549)

Web Server Commands 547
Syntax
ip http server
no ip http server
Default Configuration
The default mode is enabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables the switch to be configured from a browser.
console(config)#ip http server
ip https certificate
Use the ip https certificate command in Global Configuration mode to configure the active
certificate for HTTPS. To return to the default setting, use the no form of this command .
Syntax
ip https certificate number
no ip https certificate
• number—Specifies the certificate number. (Range: 1 - 2)
Default Configuration
The default value of the certificate number is 1.
Command Mode
Global Configuration mode
User Guidelines
The HTTPS certificate is generated using the crypto certificate generate command in Global
Configuration mode.
Example
The following example configures the active certificate for HTTPS.
console(config)#ip https certificate 1