Dell PowerEdge M805 - Manual (Page 78)

40 Command Groups
www
.dell.com | support.dell.com
area virtual-link Creates the OSPF virtual interface for the specified area-id
and neighbor router. ROSPF
area virtual-link authentication Configures the authentication type and key for the OSPF
virtual interface identified by the area ID and neighbor ID. ROSPF
area virtual-link dead-interval Configures the dead interval for the OSPF virtual interface
on the virtual interface identified by area-id and neighbor
router. ROSPF
area virtual-link hello-interval Configures the hello interval for the OSPF virtual interface
on the virtual interface identified by the area ID and
neighbor ID. ROSPF
area virtual-link retransmit-
interval Configures the retransmit interval for the OSPF virtual
interface on the virtual interface identified by the area ID
and neighbor ID. ROSPF
area virtual-link transmit-delay Configures the transmit delay for the OSPF virtual
interface on the virtual interface identified by the area ID
and neighbor ID. ROSPF
default-information originate Controls the advertisement of default routes. ROSPF
default-metric Sets a default for the metric of distributed routes. ROSPF
distance ospf Sets the route preference value of OSPF in the router. ROSPF
distribute-list out Specifies the access list to filter routes received from the
source protocol. ROSPF
enable Resets the default administrative mode of OSPF in the
router (active). ROSPF
exit-overflow-interval Configures the exit overflow interval for OSPF. ROSPF
external-lsdb-limit Configures the external LSDB limit for OSPF. ROSPF
ip ospf Enables OSPF on a router interface IC
ip ospf areaid Sets the OSPF area to which the specified router interface
belongs. IC
ip ospf authentication Sets the OSPF Authentication Type and Key for the
specified interface. IC
ip ospf cost Configures the cost on an OSPF interface. IC
ip ospf dead-interval Sets the OSPF dead interval for the specified interface. IC
ip ospf hello-interval Sets the OSPF hello interval for the specified interface. IC
ip ospf mtu-ignore Disables OSPF maximum transmission unit (MTU)
mismatch detection. IC
ip ospf priority Sets the OSPF priority for the specified router interface. IC
Command Description Mode*