Dell PowerEdge M805 - Manual (Page 615)

IP Routing Commands 619
Example
console(config)#ip routing
routing
Use the routing command in Interface Configuration mode to enable IPv4 and IPv6 routing for an
interface. View the current value for this function with the show ip brief command. The value is
labeled Routing Mode in the output display. Use the no form of the command to disable routing
for an interface.
Syntax
routing
no routing
Default Configuration
Disabled is the default configuration.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example enables IPv4 and IPv6 routing for VLAN 15
console(config)#interface vlan 15
console(config-if-vlan15)#routing
show ip brief
Use the show ip brief command in Privileged EXEC mode to display all the summary information
of the IP.
Syntax
show ip brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode